Silicon Maintenance Spray

Almost all LARP weapons are made from a foam that is then covered in a plasticised acrylic-latex paint. If not maintained, this paint eventually dries out and can flake or crack. To avoid, a silicon outer coat is applied to all weapons but is slowly worn off as the weapon strikes other weapons, shields and armour. Maintenance spray ensures your weapons are kept in the best condition possible by reinforcing this silicon layer and keeping the PAX paint underneath it moist and supple.
It should be applied after every combat, or at least once a month.

Available in 150ml or 400ml spray packs, and a 250ml pump pack.

Foam for construction of DIY items.

Directions for use:

There are multiple methods to creating a LARP weapon, but here are the basics when using our hard Epic Foam! Carve and heat the foam into your desired shape. Attach it to our softer foam or use it as detail pieces on costuming or armour. Remember to leave a safe amount of foam around the core of a weapon in order to preserve its safety. When the shape you desire is achieved, dip the weapon into latex and allow to dry between layers for a smooth, protective surface.
Coat your latex equipment with a thin layer of silicone to prevent the surface from drying out, and to prolong the lifespan of your weapon.
Always check your weapon for damage before and after each use.
Wrap the handle with leather or cloth for a finished look.

• Epic Armoury EVA Foam Hard = density is ± 90 to 95 kg/m3
• Epic Armoury EVA Foam Soft = density is 60 kg/m3

Foam for construction of DIY items.

Directions for use:

There are multiple methods to creating a LARP weapon, but here are the basics when using our hard Epic Foam! Carve and heat the foam into your desired shape. Attach it to our softer foam or use it as detail pieces on costuming or armour. Remember to leave a safe amount of foam around the core of a weapon in order to preserve its safety. When the shape you desire is achieved, dip the weapon into latex and allow to dry between layers for a smooth, protective surface.
Coat your latex equipment with a thin layer of silicone to prevent the surface from drying out, and to prolong the lifespan of your weapon. 
Always check your weapon for damage before and after each use. 
Wrap the handle with leather or cloth for a finished look.

• Epic Armoury EVA Foam Hard = density is ± 90 to 95 kg/m3
• Epic Armoury EVA Foam Soft = density is 60 kg/m3

Sure you could* use this to fasten rope around a fixed point on a yard arm, but it's much more effective as an improvised weapon to slug someone in near quarters.

*No, you couldn't. Please note that the Epic Armoury belaying pin is not a naval use device and is intended for roleplay purposes only.